Washington, November 7 (ANI): Researchers at the Fraunhofer Institute for Laser Technology ILT in Aachen, Germany, have developed a way of automating the polishing work on metals, by using lasers.

Polishing injection molds is a time-consuming and monotonous, requiring highest levels of concentration, because any blemish in the mold can render it useless.

A skilled worker may often need a whole week to polish a single metal mold.

Up to now, it has not been possible to use machines for this dreary work because they cannot get into the curved shapes.

Now, researchers at the Fraunhofer Institute for Laser Technology ILT in Aachen have developed a way of automating the polishing work.

"We do not polish the surface by hand with grinding and polishing media. Instead we use a laser," explained Dr. Ing. Edgar Willenborg, group leader at the ILT.

"The laser beam melts the surface to a depth of about 50 to 100 micrometers. Surface tension ensures that the liquid metal flows evenly and solidifies smoothly," he added.

Like in conventional grinding and polishing, the process is repeated with increasing degrees of fineness.

In the first stage, the researchers melt the surface to a depth of about 100 micrometers, in further steps they gradually reduce the depth.

"We can set the melting depth by means of various parameters: the laser output, the speed at which the laser beam travels along the surface and the length of the laser pulses," stated Willenborg.

The time gained by laser polishing and the cost saving achieved are enormous.

Whereas a skilled polisher needs about 10 to 30 minutes for each square centimeter, the laser polishes the same area in about a minute.

A prototype of the laser polishing machine developed by the scientists in cooperation with mechanical engineering firm Maschinenfabrik Arnold has already been built.

Willenborg estimates that the system will be ready for industrial use in one to two years' time. (ANI)